ns-3 is a discrete-event network simulator for Internet systems, targeted primarily for research and educational use. ns-3 is free software, licensed under the GNU GPLv2 license, and is publicly available for research, development, and use.
Take a look to how to install NS3 in ubuntu or Linux Mint
To install NS in Linux
Requirements
- ubuntu 10.10 or higher
- an internet conenction
if you have both follow the simple steps
1. open the Terminal
2.First update the Ubuntu repos:
$sudo apt-get update
After this install the following packages
$ sudo apt-get install gcc g++ python
$ sudo apt-get install gcc g++ python python-dev
$ sudo apt-get install mercurial
$ sudo apt-get install bzr
$ sudo apt-get install gdb valgrind
$ sudo apt-get install gsl-bin libgsl0-dev libgsl0ldbl
$ sudo apt-get install flex bison
$ sudo apt-get install gcc
$ sudo apt-get install g++
$ sudo apt-get install tcpdump
$ sudo apt-get install sqlite sqlite3 libsqlite3-dev
$ sudo apt-get install libxml2 libxml2-dev
$ sudo apt-get install libgtk2.0-0 libgtk2.0-dev
$ sudo apt-get install vtun lxc
$ sudo apt-get install uncrustify
$ sudo apt-get install doxygen graphviz imagemagick
$ sudo apt-get install texlive texlive-pdf texlive-latex-extra texlive generic-extra texlive-generic-recommended
$ sudo apt-get install python-pygraphviz python-kiwi python-pygoocanvas libgoocanvas-dev
Then make a directory
$ mkdir ns //(you can use of different name for ns)
$ cd ns // (with this command you can enter to your directory)
$ wget https://www.nsnam.org/release/ns-allinone-3.15.tar.bz2 //(if this command doesn’t work you can download and copy it into directory)
$ tar xjf ns-allinone-3.15.tar.bz2 //(with this command you can extract directory)
$ cd ns-allinone-3.15-RC1
$ ./build.py
$ cd ns-3.15-RC1
$ ./waf configure
$ ./waf
Simulate your networks and enjoy...........
0 komentar:
Posting Komentar