Some you know tha the Flashing is the process of reverting your iTel android device to its factory defaults by means of flashing STOCK iTel firmware on it. Or, by means of flashing Custom ROM/Firmware on it. Flashing is done to correct any software malfunctions experienced on any iTel android devices.
Even those that seem persistence after performing a Factory-Reset would be corrected by flashing the iTel android device.
DEFINITIONS OF TERMS USED Before we begin the flashing exercise, let us do a bit of introduction by introducing ourselves to the terms to be identified while flashing iTel android.
OS VERSION: this refers to the version of the firmware for which you have and that that you are going to use to flash the iTel android device.
MODEL VARIANTS: usually, there are different variant (s) of some iTel android devices as in the case of iTel 1351 E, 1351 , 1352 and itel 1353 .
HOW CAN YOU KNOW THE DIFFERENT VARIANTS OF iTel ANDROID DEVICE?
For iTel android device, it's simple. By simply checking the label behind the battery seat on the phone or by navigating to Settings >> About >> section of the phone, you can see detailed information about the phone.
FIRMWARE: iTel firmware is usually compressed and packed in a compressed file known as .PAC. This file, when flashed on iTel android devices, contains all the images, GUI and the entire files necessary to run android OS on your iTel android device and other SpreadTRUM android devices parked in similar format.
Flashing can upgrade or downgrade your iTel android device. It all depends on the versions of the firmware you used while flashing the phone.
HOW TO FLASH iTEL SPD ANDROID PHONE USING SpreadTRUM FLASH TOOL
Download the specific firmware for the iTEL android device from the link below.
Open the SpreadTRUM Flash Tool you downloaded from the link above. It is compressed in a zip file, simply extract it onto a folder on your PC, open the folder to locate the SpreadTRUM Upgrade Tool application and then; double-click it to lunch the program. See the image below:
Remember to install the SpreadTRUM Android Drivers following the normal Windows Drivers installation procedures.
- Must Read: Learn how to install SPD USB Drivers on your PC.
Switch off your iTel android device and then, connect it to your PC.
Now, select the specific STOCK FIRMWARE you downloaded for your iTel android device by clicking on the Select Pack icon. See the image below.
As soon as the file is loaded successfully, click on "Download Button" to commence the flashing operation.
Becarefull: During the flashing operation, your phone may reboot once or twice. Just leave it and do not interrupt the operation.
Once the flashing operation is successfully completed, you will see "Previous Passed" message displayed in green on the SpreadTRUM Flash Tool.
NOTE: For better understanding Watch This Video below.
CONGRATULATIONS! You have now successfully flashed your iTel android device.
Please help the blog Admin for sharing this post to your firends social media, also tell your friends about us.
If you need any help concerning this tutorial you can Contact Us or drop your comment.
Still you can also add my number to your whatsapp contact 08067611897.
0 komentar:
Posting Komentar